Solar energy

With the advancement of science and technology, more and more high-intelligent products are available, which on the one hand improves work efficiency and on the other hand can replace original products, thereby greatly reducing the consumption of resources and waste generated by the original products. Environmental pollution. For example, the intelligent robot "Walley" that came out in the past time - the solar lawn mower, makes people faster and more convenient, not so hard, and is energy-saving and environmentally friendly products.

Solar lawn mower

Solar lawn mower

Advantages: Since the mower works to burn gasoline to produce greenhouse gases: carbon monoxide, hydrocarbons and nitrogen oxides, but the mower engine cannot be as easily regulated as the car emission control, so reducing the greenhouse gas emissions of the mower becomes environmentally friendly. A key content.

Disadvantages: Because the sun can be used to carry out weeding operations when it is abundant, if it is cloudy, the sun is weak, and solar energy cannot be converted into more efficient electricity. If the amount of electricity stored in normal times is too high, it will result in the failure to properly weed.

intelligent

Intelligent mower function

Intelligent mower function

The intelligent mower can automatically walk, prevent collision, automatically return to charge within the range, with safety detection and battery power detection, and has certain climbing ability, especially suitable for lawn trimming maintenance in home courtyards, public green spaces and other places. The work of mowing the lawn can be done automatically, without manual control and operation, and the power is low, the noise is small, the shape is exquisite and beautiful, and the manual operation is greatly reduced. Greatly improve work efficiency and save money.

Some features of the intelligent lawn mower: automatic mowing, cleaning grass clippings, automatic rain protection, automatic charging, automatic avoidance of obstacles, small size, electronic virtual fence, network control, etc.

Intelligent lawn mower

Intelligent lawn mower

The intelligent lawn mower is suitable for clearing all kinds of weeds such as reeds, alfalfa and fish grass in plains, terraces, orchards and triangles. It is easy to operate and has high work efficiency. We usually find it in schools, as well as street beautification, which are done with lawn mowers. In foreign countries, many families have weeding machines to weed their gardens.

Need to pay attention before and after use:

Before mowing the lawn mower, the debris in the mowing area must be removed to avoid damage to the machine caused by the grass head. When starting the engine in the cold state, the damper should be closed first, and then the damper should be opened at the appropriate time. If the turf area is too large. The continuous working time of the mower should not be too long. It is best not to exceed 6 hours in winter and 3 hours in summer (depending on the equipment).

After the mower is used, it should be thoroughly cleaned, and all the screws should be tightened, the blade should be damaged, the high pressure cap should be repaired, and the mower should be used according to the service life. Strengthen the inspection or replacement of consumable parts and maintain a certain inclination to the side of the fruit tree, saving labor.

Cultivator weeder

Since 1988, a multifunctional cultivating weeding machine has been developed. This utility model belongs to the field of agricultural machinery technology. It is characterized by its ability to work with small and medium-sized tractors and is suitable for crops such as corn, soybean, sorghum, cotton and grain. The soil-weaving and weeding of the seedlings, the loosening of the grass by the side of the grass, and the double operation of the tilling and tilling are completed once. Basically 40-70cm adjustable, comb teeth and rotary knives work synchronously, the length of the comb teeth is adjustable, and the loosening depth is adjustable 3-7cm. The driver operates one person, the injury rate is less than 1‰, the working efficiency is 8-10mu/hour, the high and low speed gearbox is equipped with the clutch, the fertilization tank is equipped with three synchronous fertilisers, and the three plow bodies are equipped with two sets of ploughs to ensure the shape. The need for change, the machine rack can be universal.

Change the oil: change the oil to the lawn mower: the lawn machine should be replaced after the first operation for 3.5 hours, and then replace the oil every 30-50 hours. To change the oil, the oil should be drained in the oil drain hole of the bottom oil pan of the lower part of the cutter, or the fuel filler port can be opened, and the left side of the machine should be drained (the air filter must be at the top). Immediately after removing the spark plug ignition wire, the oil is cleaned, restored, and the appropriate oil is added to the specified scale. Note that the waste engine oil that is released should be kept well, and the waste oil recycler should be handed over to the environment.

Use check: Before using the mower, you must first check the oil level to see if it is between the upper and lower scales of the oil gauge. The oil should be replaced after 5 hours of use of the new machine. After 10 hours of use, the oil should be replaced again. After that, the oil should be changed periodically according to the instructions. The oil change should be carried out while the engine is in a hot state. Do not add too much oil, otherwise it will appear: black smoke, insufficient power (excessive cylinder carbon deposits, small spark plug gap). The engine is overheated. Filling the oil should not be too small, otherwise it will appear: the engine gear is noisy, the piston ring cylinder accelerates wear and damage. There are even phenomena such as lava, causing serious damage to the engine.

When adding gasoline to the fuel tank, it should be filtered through the filter. When cleaning the carburetor, the special cleaner for the carburetor should be applied. The cleaning cycle is determined by the degree of contamination of the carburetor. When the carburetor fails, or the engine cannot start, or turns off after starting, it should be cleaned immediately. Check the air filter for dirty before and after each use. If it is too dirty, it will cause the engine to be difficult to start, black smoke, and insufficient power. If the filter element is paper, remove the filter element and remove the dust attached to it. If the filter element is sponge, after cleaning with gasoline, apply some lubricant to the filter element to keep the filter element moist. Conducive to the adsorption of dust.

Always change the filter element to keep the machine running normally.

heat sink

The main function of the radiator is to eliminate noise and heat. When the mower is working, the flying grass clippings will adhere to the radiator, affecting its heat dissipation function. If it is serious, it will cause the cylinder to be pulled and damage the engine. Therefore, every time you use the lawn mower, you must be very serious. Clean up debris on the heat sink....