Wood chippers are widely used in papermaking, particleboard, fiberboard, wood flour processing, industrial material preparation, etc. This equipment is generally used in wood processing bases. Materials such as logs, small-diameter wood, branches and branches, wooden sticks, plates and the like can be cut into materials with uniform length and smooth cuts, and wood chips machined by wood chipping have high quality.

The wood chipper can cut processing residues and cut wood wastes, such as branches, branches, veneer, slats, log cores, waste veneer, etc. The machine can also cut forestry materials, such as sugarcane, reed, bamboo and bamboo. The machine has reasonable structural design and is welded with high-quality steel plate structure. The whole machine is mainly composed of machine body, knife roller, upper and lower feeding rollers, conveyor belt and hydraulic system (excluding motor). Two or three or four fly knives are installed on the knife roller of high-strength welding plate and wood chipper. The fly knives are fixed on the knife roller with specially manufactured fly knife bolts through pressure blocks. According to different thicknesses of cut materials, the upper feed roller assembly can float up and down in a certain range by means of a hydraulic system. The cut qualified pieces fall through the screen holes and are discharged from the bottom. Large pieces will be cut in the machine.