Drum chipper flower board factory, medium and high density fiberboard plant, Hetian plant, bio-power plant, wood chip factory and other industries and manufacturers in the production of equipment before the preferred equipment. The product has advanced structure, high quality of cutting flakes, adaptable light for raw materials, and convenient operation and maintenance. The main raw materials for cutting are small-diameter wood, wood harvesting, processing residues (such as branches, branches, boards, slats, round wood cores, waste veneers, etc.), and can also be used to cut non-wood raw materials (such as sugar cane, reed, bamboo). Wait).

The drum chipper consists of a body, a knife roll, an upper and lower feed roller, a conveyor belt, and a hydraulic system. The body is welded with high-strength steel plates and is the basis for the support of the entire machine. Two or three or four flying knives are mounted on the knife roll, and the flying knives are fixed on the knife roll by a pressure block by a specially manufactured flying knife bolt. Depending on the thickness of the material being cut, the upper feed roller assembly can be floated up and down within a certain range by means of a hydraulic system. The cut piece of the qualified piece falls through the screen hole and is discharged from the bottom, and the large piece of material is cut in the machine.

Hydraulic system: supplied by oil pump to the cylinder, the cover can be activated to facilitate the replacement of the blade; the upper feeding roller assembly can be lifted during maintenance, which is convenient for adjusting the gap between the flying knife and the bottom knife and the disassembly and assembly of the comb.

The disc chipper is divided into two types according to the number of knives on the cutter: ordinary chipper (4-6 knives) and multi-blade chipper (8-6 knives). The two types of chipper feeding methods include oblique feeding and flat feeding (or horizontal feeding). The shavings of long logs are generally fed with flat mouth. The shavings of short logs and slabs can be fed by oblique mouth or flat feed. Chipper This series of disc chipper is compact in structure, reasonable in layout, easy to install, convenient in operation and maintenance, and high in productivity. When cutting logs, the quality of wood chips is high, and the length of wood chips can be freely adjusted within the specified range. Disc chipper.