Sawdust machine is a machine specialized in producing sawdust, but the quality of sawdust cut by sawdust machine is different. There are many factors that affect the quality of wood chips, such as whether the blade is sharp, the humidity of wood, the quality of the machine, the length of the blade, the hardness of wood, etc. 　

Sanjing Machinery summarized some problems encountered in the use of sawdust machine:

Front point:

The quality of the raw materials and the quality of the raw materials themselves directly affect the quality of the chips. Therefore, it is required that the raw materials have a good appearance, a certain moisture content, no decay and less skin content. 　　　　　　　

Second point:

The sharpness of sawdust machine tools directly affects the quality of chipping. To keep the cutting edge sharp, it is required to polish and replace the blade on a regular basis. Generally speaking, the flying knife should be polished every 4 ~ 8 hours, and the blade should be replaced every half month. 　　　　　

Third point:

The installation of the blade, the length and thickness of the raw material chipping of the sawdust machine are determined by the installation position and angle of the blade, and the width of the chipping is formed by natural cracking, which is generally slightly smaller than the length of the chipping. It is required that all blades extend the same amount and accurately keep the distance between the flying knife and the bottom knife.